1000 watts stereo amplifier

I recently purcahsed both a 1000 watt subwoofer and a 1000 watt stereo, and i need to know if i need an amplifier to go with my subwoofer or if i can just plug it into my stereo.

only if they are both 1000 watts RMS, and only if their ohm loads match.

2008-11-26 18:43:32 by Fernando

three volfenhag 12quot; DVC subs in sealed box with a Lanzar 4000 Claimed watt amplifier. 4awg power wire into dual 8awg.

I am buying a stereo system for my car. So, If I buy one 1000 watt Sub, then do I need 1000 watt amp or less wattage??

And If I buy 2 1000 watt Subs, then can I still use a 1000 watt amplifier??

Also, What sounds the best, 2 10 inch subs, or one 12 inch 1000 watt??

Thank you!!

(Once I know I will go to ebay right now and buy, I need to know what wattage and stuff)

There's no good way to compare subs just based on the size of the cone.

10" is usually more crisp than 12", whic is more crisp than 15"

However,

15" is usually deeper and louder than 12" which is deeper and louder than 10"

If you've never had subwoofers before, I suggest you get yourself 1 12" sub rated for approximately 300 watts RMS, and find an amp that can do that as well.

Check the resistance on the sub, find one that is 4 ohm. Then, pick out a Class A Stereo amp that is "stable at 4 ohm bridged" for 300 watt rms. It should be plenty.

It's also important to pick the right sub. Ask around and see what subs are good for you to get. Punch subs by Rockford Fosgate have always been a good starter sub.

And for some more of the technical stuff, if you have 1 sub that is rated for 400 watts rms, then you should buy an amp rated for 400 watts rms. If you have 2 subs that are rated for 400 watts rms, then you're going to have to step it up and buy a sub that is 800 watts rms, or 400x2 watts rms.

Hope this helps.

2007-10-04 16:15:23 by Sublime Chick

Price: $242.99

Auto On Switch - Speaker A/B Binding Post Terminals - Detachable Power AC Input
Balance Control - 1 Stereo Line Output - Unswitched 200W Max AC Outlet
Speaker A/B Channel Selectors LED Indicators - 2 Stereo Line Inputs - Replaceable Fuse
Power On/Off Switch LED Indicator - Auto Input Switching - Bridgeable Output - Dimensions: 16.5''W x 2.36''H x 8.2''D
Volume Control - Stereo/Bridged Mode Selector - 110/220 Voltage Selector

a stereo amplifier is rated at 150w @ 1000 Hz. the power output drops by 10dB @ 15kHz. What is the power output in watts at 15 kHz

10 dB is a ratio of 10:1 for power, so the output is 150w/10 = 15 watts.

.

2009-05-25 17:27:20 by jmeretab

Price: $115.99

250 Watts x 2 Channels @ 8 Ohm
2-channel bridgeable
Frequency response: 20Hz-20kHz
500 Watts x 2 Channels @ 4 Ohm
Overload and protection indicator

Can u use 2 amps to power one sub?
say that i want to power a 1000 rms sub
kicker comp vx 4 ohms
then can i use two
KAC-9104D amps to power the sub??
because i only found like 4 amps that power the sub alone
nd they cost round 800!
or the same thing for a kicker l7 15" 1000 watts rms
can i use two of those amps to power it??

here are the links to the subs i want
also would one TWO CHANNEL CYCLONE AUDIO CA-798 1000 WATT STEREO AMPLIFIER..i would get it but iono if it is a cheap brand or not
here are the links anyway to the subs and the amps i mite want

http://www.mainstreet-audio.com/Merchant 2/merchant.mvc?Screen=PROD&Product_C ode=06S15L72

http://www.amazon.com/gp/offer-listing/B 000ESUUXU?ie=UTF8&condition=new& tag=yahoo-ce-mp-20&creative=380345&a mp;creativeASIN=B000ESUUXU&linkCode= asm

http://www.ugotadeal.com/product_info.ph p?products_id=4827&ref=froogle
http://cgi.ebay.com/ebaymotors/BRAND-NEW -1000-WATT-RMS-CAR-STEREO-POWER-AMPLIFIE R-amp_W0QQcmdZViewItemQQcategoryZ38638QQ ihZ014QQitemZ330239189890QQrdZ1QQsspagen ameZWDVW

http://www.amazon.com/Special-1000-Watt- 4-Channel-MOSFET-Amplifier/dp/B0015ADEEI /ref=sr_1_1?ie=UTF8&s=electronics&am p;qid=1211934801&sr=8-1

i dont think its possible to power one sub with to amps

2008-05-27 17:46:27 by T-PAIN

LEGACY 2000 WATT 2/1 CHANNEL CAR STEREO AMPLIFIER AMP
1000 Watts x 2 Output
2000 Watts x 1 Bridged Output
Variable Hi/Lo Electronic Crossover Network
Variable Bass Boost
Variable Input Level (Gain) Control
MOSFET PWM Power Supply
Power ON LED Indicator
LED Protection Indicator
Remote Bass Boost
Hi/Lo Impedance Input
Blue Color LED Illuminated
Thermal / Overload / Short Circuit Protection
Anti-Thump Turn-On
Dimensions: 2.32' H x 12.32' W x 17' L
600W RMS

'08 KIcKER SoLoBARIC 15" L7 SUBWOOFER Subs Sub Solo
2000 watts max power handling
1000 Watts RMS power handling
89.4 DB sensitivity
frequency response: 18 - 100 K
mounting depth: 8 11/16
cut out diameter: 13-3/4
sealed box volume: 1.5 - 6.00 cubic feet
vented box 3 - 6 cubic feet
Square design gives more surface area than a normal round sub (this will sound like an 15" round sub)
Solokon 1 piece cone
Cast aluminum basket
Santoprene rubber surrounds
High Temperature Coils (this sub will never ever burn out!)

That amp will do fantastic for this sub. Finally some1 that doesn't scrimp when it comes to sound equipment. Keep up the good work!

2009-02-03 11:48:16 by El Homeboy