alpine 1000 watts

I have read that on this site that Pyle speakers aren't so good. But I am wondering if a different brand like Alpine or Kenwood with lower watts will sound louder and better?
Peak power for both speakers. I don't have an amp or sub either, just an sony head unit and I want upgraded speakers.

Absolutely. Its called pyle for a reason bro.

2008-01-22 16:58:38 by tg

Title says it all! Oh and its only -20 degrees Celsius outside no big deal ;)

It is rated at 500 RMS but is it okay to run it at 1000?

i have a mrp m 500 alpine amp. thinking of replacing it with pdx 1.1000 for a louder and cleaner boom from a cleaner amp.

The sub will not last long at all. You can get away with 600 watts or maybe a little more, but you will have to upgrade the sub with the amp as well if you want to push 1000 watts.

2009-03-09 14:16:22 by Vigor

RMS Power Per Channel Into 2 Ohms: 1000W X 1
Works Best With 2 Single Voice Coil Subs Or 1 Dual Voice
MOSFET Power Power Supply Design
RMS Power Per Channel Into 4 Ohms: 600W X 1

I have and Alpine PDX 1000 watt. I have an 06 chevy crew cab and I am 99% sure I can fit 3 12s back there with just the right amount of air space for the subs. I think maybe 12s are much cleaner or I would go with 10s. I am going to go with the JL Audio W3V2s which are rated at 600 RMS. My question is, will my 1000 watts be enough, just right, or too little for all 3 of my 12s? Any and all info is greatly appreciated.

i think the 1000 is gonna work but to get the best bump from the subs you might wanna go up to 1500 watt amp play it by ear see how they hit if they seem flat then up to 1500 iwould go

2008-03-12 23:38:31 by tateg2005

Price: $250.00

Speaker-level inputs with signal sensing turn-on
1000W Max Power
300 X 1 @ 4_
Variable low-pass filter
Class D Mono Car Audio Amplifier

Will a MRP-M1000 - Alpine 1000 Watt Mono Subwoofer Amplifier be enough power for 2 12 inch subs will i be able to wire both subs to the one amp
2 12 inch alpine type r 500 watt rms each 1500 max each

yes it is percectly fine to use one amp for two subs. i have this in my car. all you need to do is externally bridge the amp. that means putting a wire from the negative of the amp to one of the subs put one from the positive to the other sub and connect the remaining terminals on the subs together, giving you a complete circuit.

2009-06-25 13:26:58 by Ryan

i would get the alpine ...i wouldnt get the kicker amp unless the rest of my system is kicker theres just somethjing about kicker i dont like

2008-07-26 21:41:16 by 400 Meters