kole audio amp

My current power wire isn't that thick. If i buy like a 2 gauge power wire would that give me more bass or is there something else that I need to buy?

Are the subs in the right enclosure?

Often times this can be the issue. Check what the manufacturer of the subs recommend for the type of enclosure.

Do you have the gain set right?

The purpose of the gain is to match the signal volts RMS coming from the source (CD player, etc.) to the input of the amp.

Here is a guide that will help you set the gain correctly as well as choosing the right sized power wire http://www.datafilehost.com/download.php ?file=6d26c621

You'll need a multi-meter (AC voltmeter), Microsft Excel and a way to burn an audio CD from an MP3.

If you don't have Excel, e-mail me and I'll send you a condensed version sparky3489@yahoo.com
____________________
There was a experiment where 15 pro audio shops were given the task to set a specific setup by ear. Only 2 had it set within tolerances of actual measurement. The other 13 had the system clipping while 3 had the system severely clipping.

Do you have the sub wiring configuration correct?

See my site for more info on sub wiring methods and other tips http://spkrbox1.spaces.live.com

2007-06-12 13:11:35 by Spencer W

In the middle of installing my new ph4-800 checking and making sure everything works and turns on before final assembly.

Are they any good? give me your feedback!

Kole Audio makes everything garbage. I'd stay away from that stuff.

2008-03-04 20:23:26 by JUAN

Price: $499.95 $129.99

RMS Power Rating:2 Ohms: 820 Watts X 1 Channel
Max Power Output: 1800 Watts X 1 Channel
RMS Power Rating:1 Ohm: 1100 Watts X 1 Channel
RMS Power Rating:4 Ohms: 550 Watts X 1 Channel

All I know about Kole is that my brother blue his Kole amps with four 15" Power Acoustik Crystal subs. I know these arent really top-of-the-line amps but would they do? They seem pretty affordable

If somebody blew that amp with pa subs then you know the amp is crap.I will bet you that even if they rate that amp at 5500w it would only put out 900w max!

2008-01-10 09:35:29 by OG D-Wet

Price: $299.95 $54.99

12 Megapixel high quality - CMOS sensors deliver higher quality pixels better pixels are better than more pixels and Kodak's first BSI CMOS sensor delivers stunning low-light picture quality with less noise and less blur no flash needed
30X SCHNEIDER-KREUZNACH VARIOGON Optical Zoom Lens (35 mm equivalent - 28-840 mm) zooms in faster and closer than ever to deliver crisp, steady shots for extraordinary creative performance.
Program auto mode (P) camera sets optimal shutter speed and aperture combination
Optical image stabilization
Capture that challenging action shot with fast, click-to-capture speed and auto focus.

both of them are junk you can find at flea markets

2007-09-06 18:00:53 by Jessy C

thats 1-channel and pushes at least 1800 Watts RMS at 2Ohm and no more than 2500 Watts RMS at 2OHM does anyone know of any that cost no more than $350 (it cant be from EBay)
shut the hell up spaky thats all you ever say you never actually answer n e 1's ?'s

Some hidden costs you may not be aware of:

If your total system power is 1000 watts RMS or more, you will need to:

1. Upgrade the alternator to a high output alternator
2. Upgrade to a heavy duty deep cycle battery
3. Upgrade the "Big 3" - that is to replace the power wire between the battery and alternator, the ground from the battery to the chassis and the ground strap from the engine/tranny to the chassis with at least 1/0 AWG wire.

Failure to do this will result in you replacing them anyway as the alternator will eventually fail.

Here is a guide that will calculate what size alternator and power wires you need http://www.datafilehost.com/download.php ?file=6d26c621

See my site for more info http://spkrbox1.spaces.live.com

2007-09-25 19:24:41 by rjs8991