memphis amplifiers

try to find your product here http://www.memphiscaraudio.com/ or you can put your model number in the search field on the Internet and go to different sites that sell it and look up the specs there

2008-04-06 16:40:29 by jdubb6661

15-M3104D - Memphis 10quot; 600 Watt DVC Subwoofers RMS/Peak (W) 300/600, Sensitivity (dB) 91.3, Magnet SIze (oz) 85 Class D MClass Amplifiers 16 ...

I have a 94 mustang with four speakers (two rear,two front). The specification for the speakers I bought say:

Diameter 5*7
Maximum Power Handling 100W
Continous Power Handling 50W
Frequency Response 62-21kHZ

How many channels should I get cause I might get a subwoofer later.

if you want to add an amp to these speakers get a 4 channel. dont get an amp that powers a sub and speakers like a 5 channel. get a 4 channel amp and then buy a seperate monoblock amp for your sub. monoblock amps are meant for subwoofers and will perform the best. but looking at the specs of your speakers you prob shouldnt get an amp for them. if your running an aftermarket deck then it is already pushing out 45 to 50 watts for each speaker. you'll prob end up blowing them. but if you really want to get one just get 2 amps like i said

2008-03-31 05:43:50 by Senior Airman Gregory C

Price: $15.95 $7.95

3.15" x 3.15" x 1" thick
Sleeve bearings for quiet operation
12 volt cooling fan

how do i wire up 2 dvc 4ohm subs to the Memphis MOJO 16-MCD4kw Amplifier. It has two channels but its a monoblock 1ohm statible! So i cant wire it to one 1ohm??? Plz tell me the best way to hook the subs up to the amplifier!

You need to wire each sub in parallel for a 2ohm load.
See here how to wire your sub and use option 1.
http://www.the12volt.com/caraudio/woofer _configurations.asp?Q=1&I=42

Then wire each sub to each channel on the amp,this will give you a 1ohm load because the two channels on the amp are wired together internally.

I hope your subs can handle 2000 watts each.

2009-04-13 07:11:55 by corster-yo

RMS Power @ 4ohms: 150 x 1
Frequency Response: 10Hz-400Hz
RMS Power @ 2ohms: 300 x 1
Variable low pass crossover
RMS Power @ 1ohms: 500 x 1

I want two 15s..I heard Punch was pretty good..what about Memphis ?

I will vouch for matts answer... all of the brands he chose are quality!
Right now the brands you are looking at are cheap crap...
If you want something worth your money look into the RD audio Alpha 15's
They are having a sale right now and those 15s are CHEAP for thwta they are
they handle 2 k watts RMS
Also RD makes some quality amps!
-Patrick
Site Admin
http://www.carstereoforum.net/
Got Questions? We can help!

2009-08-12 12:47:56 by The Truth Hurts !

I received a Memphis Audio amp from a friend and he says it is a 500 Watt 2 channel amp. I need to know how i can figure out if it actually is 500 watts, i have no reason not to believe him, but the amp does not say its wattage on the amp's body which i think is strange. It has two "15" Fuses in it if that helps.... it is a solid black 2 channel amp with a memphis audio "M" that illuminates blue when it receives power... it pushes a 300 watt RMS rated sony Xplod no problem... it is about a foot long and 6 or 7 inches wide... and about 3 or 4 inches tall... any info on this amp would be appreciated

It seems that you have an M-Class Amplifier.
http://www.memphiscaraudio.com/products/ amplifiers/class-ab-mclass-amplifiers/
Try to look your amp up.