Consumer Electronics Site .com

12 inch speaker enclosure


ATREND Car Speakers

Car Speakers


Atrend E12Sv B Box Series 12-Inch Single Vented Subwoofer Enclosure
(Electronics) ATREND

1-inch Speaker Baffles
Completely Carpeted Enclosure
MDF Construction
Screwed Down Terminal Cups
12-inch Single Vented Enclosure


Price: $59.95 $44.99

Car Speakers Answers

How do i build a Subwoofer, NOT an enclosure.?
15's box completed-no speakers

I have a magnet from a 12 inch subwoofer, but i do not have the speaker itself. I know how to build an enclosure already, but i need to know how to build the actual speaker itself. I was going to try to put a 10 inch speaker on the 12 magnet if possible. Any ideas?


Well if you can get a basket (where the magnet would attach) to house all of the components then its possible. I have thought about it myself. Check out http://youtube.com/watch?v=izQHjVWfzDQ They show the basics of building a speaker. Its basically a voice coil (bunch of copper wire wrapped around a paper tube) attached to a cone.
Hope this helps.

2008-05-23 10:56:34 by inmyglassprison

Worst Way To Cut A Speaker Hole - Ported 100 MPH Car Audio Sub Box ...


With the router now broken....We had only a skillsaw, and sawzall - Subscribe For More Northern Madness - CHECK OUT MY 2nd CHANNEL!! www.youtube ...

what stores can i buy speaker enclosures from?

I Need An Enclosure For two 12 inch subwoffrs are there any stores that sell them ?


If you are talking about home audio, none. Majority of the subwoofers for home audio are in enclosures already. Best Buy and other Car audio retail stores carry enclosure box for subwoofer. You can't use car audio speakers for home use. You also need a power amplifier to drive the subwoofer and home audio does not provide amplifier for subwoofers for normal consumers. High end audio does carry power amplifiers, but the price are high. Hope this will help.

2009-08-17 12:21:16 by Babii

Cadence Acoustics UDB122 600 Watt Peak Single 12-Inch 2 Ohm Passive Subwoofer Enclosure
Cadence Acoustics Ltd Car Speakers

Price: $229.00 $189.00

Power Handling: 300W RMS / 600W Peak
Frequency Response: 25Hz - 1.5 kHz
Sensitivity: 92dB @ 1w/1m SPL
Cadence UDB122 single 12-inch passive subwoofer enclosure

is this a good ported enclosure for 2 alpine type x subwoofers!?

http://cgi.ebay.com/ebaymotors/DUAL-12-I NCH-SUBWOOFER-BOX-2-SPEAKER-SUB-ENCLOSUR E_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205Q 7c66Q3a2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1308 Q7c301Q3a1Q7c293Q3a1Q7c294Q3a50QQ_trksid Zp3286Q2ec0Q2em14QQhashZitem260400559572 QQitemZ260400559572QQptZCarQ5fSubwoofers Q5fEnclosures

no i will not make my own box. is this reccomended ?? if not can i have a link of a good ported box?


i would go and get a custom box made... alpine x pump out soooo much that i think that would be too small, i had a type r in a box too small and the bass sounds real boomy and dodgy, custom made boxs would be the go i think.

2009-04-29 17:41:52 by Joeeee

Marathon Rms-450 High Impact Bi-Amp Molded Polypropylene Powered 12-Inch 2-Way Enclosure
Marathon Professional Car Speakers

Price: $650.00 Too low to display

1.75" Voice Coil, 1" Exit Titanium Compression Driver
5 Integral suspension points / Complete mounting solutions
(Long term/Max), 123dB / 126dB
80° × 60° Coverage Pattern / Smooth response with high power handling capacity
High impact molded Polypropylene enclosure / Amplifier Power LF: 350 Watt / Amplifier Power HF: 100 Watt

I've lost a site that sells a 12-inch air-suspension woofer; Know it?

12-Inch woofers designed for air suspension speakers like the ancient AR7 (closed enclosure) are rare. I have seen, but lost one e-biz that sells them for about $170 each. Do you know which one and have a name or link?


Here are a couple of sites that might get you there...

http://www.parts-express.com

http://www.madisound.com

H a p p y
L i s t e n i n g !

2007-03-15 19:25:58 by e-Manuel

What is the best way to upholster an enclosure?

My speaker box is nearly finished and I just picked up some fabric. This is my first setup and I know nothing about upholsetry. Just for reference, my box is a very simple rectangular prism that houses two 12 inch subs (3 total cubic feet inside). How should I attach the fabric to the MDF? What is the best way to join corners and edges so they are clean-looking? Any tips or guide would be greatly appreciated. Thanks!


get some spray on adhesive and put the uphostlery on there and for the corners you could but some corner protecters to give it a finished look
http://www.crutchfield.com/S-Lg12a1z8qrM /cgi-bin/ProdView.asp?g=743&I=125153 6

2007-02-27 18:29:43 by Nick S


  • Buy Cheap Car Speakers

    • Scosche Se12 12-Inch Sealed Subwoofer Enclosure | Subwoofers Review

    Having the correct enclosure makes all the difference in how a subwoofer will sound. EFX builds high quality boxes that are sure to bring out the best in a subwoofer. The SE12 can hold one 12" subwoofer in a sealed enclosure. The box is made of 75" medium-density fiber board for extended durability. The pre-cut speaker openings and charcoal carpet make this box a real eye catcher. A beautiful box is no good at all if it does not sound good and there is no need to worry because this thing sounds wonderful. I am forty years old and have serious home audio equipment. In fact I have three different stereo systems in various parts of my house all with Paradigm speakers and Hsu subs. I like clean bass...

    Read more...

    News

    Alpine Debuts Broad Lineup, Training Program

    Twice - Feb 11, 2010

    In speakers, the company is launching a $449-suggested 10-inch subwoofer and $499 12-inch model whose shallow mounting depths of 3.25 inches and 3.5 inches,
    MSI rolls out GT series of gaming laptops

    Driver Headquarters (blog) - Feb 25, 2010

    sound: MSI claims to have worked with a #39;leader in sound system design#39; to tune the enclosure and speakers to provide better than usual notebook audio. and morenbsp;raquo;
    1995 GMC Sierra - Tangerine Dream Ten Years In The Making

    Truckin Magazine - Feb 12, 2010

    John tackled the chassis in his own garage in Natchitoches, Louisiana, as the frame was stripped and boxed with 3/16-inch steel in preparation for the new