12 inch speaker grills

I want to know if this 12 inch sub Specs:

TS-W3002D4: Dual 4 ohm, 4 Layer, Long Coil (2 ohm x or 8 ohm)
Size 12"
Woofer Cone Material Interlaced Basalt/Carbon Fiber Reinforced IMPP Cone
Surround Wide-Roll, 3-Layer Fiber Woven Aramid Radial with Honeycomb Cloth
Voice Coil Dual 4-Layer, Long Voice Coil
Voice Coil Wire Copper
Voice Coil Bobbin Phenol Resin Coated Glass Cloth
Projected Pole Yoke with Vented Pole
Magnet Construction Double Stacked (114oz)
Basket Design Aluminum Die-Cast Rigid Chassis
Gasket 1-Piece ABS
Wire Terminals Integrated Single-Sided Silver Compression Terminals
Specifications
Watts MAX. Music Power 3500 Watts
Watts Nominal Power Handling 1000 Watts
Frequency Response 20 Hz to 150 Hz
Sensitivity 90 dB
Ohm Rating D2: (1 or 4 ohm) D4: (2 or 8 ohm)
Recommended Enclosure 0.50 ~ 1.0 Cubic Feet
Dimensions 329 mm x 214.2 mm
Mounting Depth 188.8 mm
Accessory Grill UD-G308

will work with this amp PRS-D1200SPL

Specifications:

Peak Music Power 2400 Watts
Number of Channels 1
Load Impedance Capability 1~8 Ohm
Continuous Power (4 ohm) 500W x 1
Continuous Power (2 ohm) 1000W x 1
Continuous Power (1 ohm) 1200W x 1
Frequency Response 40Hz ~ 240Hz
Signal-to-Noise Ratio 70dB
Dimensions 15" x 2-5/8" x 11-1/8"
Features
Channel # Capability 1
Class-D Design
PWM Regulated MOSFET Power Supply
MOSFET Output Section
MASS Compatible
Compression-Type Speaker Terminals
Balanced Isolator Input Circuit
RCA Inputs 2 Channel (Gold)
RCA Outputs (Pass Thru)
Input Level Control Hi-Volt (400mV ~ 6.5V)
Built-in Crossover LPF
Bass Level Control 0/6/9/12dB
Warranty 2 Year
CEA 2006 Specifications
Output Power (4 Ohm, <=1% THD) 500 Watts
Output Power (2 Ohm, <=1% THD) 1000 Watts
Signal to Noise (1 Watt into 4 Ohms) 54 dBA

i know that the speaker rms is 1000 watts, this amp if im not mistaken puts out 1000 watts at 2ohms, will the amp overheat? how should the speaker be wired? can this amp power this sub perfectly?

as long as you don't try to overdo it you should be ok, keep in mind companies will write 1000 on the box to get you to buy it, you shouldn't actually be trying to push that much all the time. and as far as wiring the speaker, if the amp is only one channel, i don't think you really have options

2009-02-14 23:59:10 by wcenteno

Selling on ebay cgi.ebay.co.uk Bamp;W ASW1000 Active 120w 12-inch Subwoofer The ASW1000 active subwoofer adds a new depth to Bamp;W#39;s quest ...

Picture this: 2 6 1/2 inch 100 watt speakers built into an old used plastic cooler. I've got a used pioneer 100 watt 2 channel amp, and although it's probably really only 50 watts RMS, it'll work fine for this. The inputs go into the amp coming from a normal 3.5 mm jack like you stick into your ipod, portable cd player, or sirius radio.

You can't get this kind of power with decent sound in a jambox for less than 200 or so. I'm not making an award winning system here. Just something loud w/ fidelity for tunes when grilling and chilling or an outdoor party.

The problem is the power supply. I've checked around, and I can't find where you can easily step down 110V AC to 12 VDC. (There's inverters from 12 V to 110AC everywhere you go though)

I don't want to spend a 100 bucks on a power supply or have to screw around recharging a deep cycle 12 V battery. It would triple the weight of the thing too

Is there another way to do this? A cheap way?

Thanks for any help

You can use an old computer power supply.
http://www.wikihow.com/Convert-a-Compute r-ATX-Power-Supply-to-a-Lab-Power-Supply

Or one of these:
http://www.8starshop.com/products/others /b-wall-ac-to-dc-12v-car-cigarette-light er-plug-adapter.html
http://www.dealsdirect.com.au/p/12v-powe r-station-power-supply/

2007-11-18 15:17:14 by Kevin

Price: $31.99 $7.99

Packed in a Gift Box
1 Pair 12'' Grills w/Brackets Screws