25 inch speakers

has anyone done it?

aggervating, just get 2 6x9 speakers with 6x9 boxes and put them behind the seat, they will fit and sound good, thats the best way

2008-05-24 14:44:23 by seBADoh

Review of my speakers. If you have any more questions, leave a comment or send me an e-mail. Btw... SHOUT OUT TO COREY!!!! Comment amp; Subscribe!

It doesn't have any watts in it. Watts are a function of the amount of current flowing through the speaker and voltage applied. The number of watts that it is capable of handling depends on what kind of watts you are talking about, RMS or peak and the output impedance of your radio. The speakers are listed as 4 ohm. Also the number of watts is only indirectly related to the sound output volume. The number of watts only indicates the amount of power that the speaker is consuming. A good five watt speaker may produce better and louder sound than a poor 100 watt speaker.

2007-11-03 13:24:30 by a006adam

Price: $55.00

40 Hz to 26 kHz frequency response; 89 dB sensitivity
Shallow mounting depth for easy install into a wide variety of vehicles
5-1/4-inch, two-way speakers with 140 watts maximum power handling (25 watts nominal)
Composite IMPP cone woofer with cloth surround
1-3/16-inch balanced dome tweeter with neodymium magnet

I've got a 1994 LeBaron convertible, and a JVC KD-HDR1 head unit. Since the car is a convertible, I don't want to put a ton of sound equipment in it, it's far too easy to break into and steal the equipment.

I've got some Infinity Reference Series 3.5 inch speakers in the dash, and Kicker KD-S55 speakers in the rear. I'm looking for a recommendation for a good 5.25 speaker for the front. I don't intend to run an amp or subwoofer, but I want a speaker that reproduces sound accurately at moderate to reasonably high volumes when the top is down. Any suggestion?

same as you got up front, infinity references:) got references all around in my car(including subs) and it sounds amazing.

2007-09-28 08:08:45 by Galaxie500XL

Price: $59.95 $14.99

Carbon Mica Cone
Hybrid Surround
5-1/4" 2-Way Coaxial Speakers
200W Peak, 27W RMS
PEI (Poly-Ether Image) Midrange/Tweeter

I just bought a head unit for my 1996 New Yorker and am waiting to buy a wiring harness for it, and now am looking at buying speakers for the car also, how much would 2 5.25 inch full range speaker in the front and 2 6x9 4 way speakers in the back cost to install if I brought it to a professional? Would autozone or a place like that install it? I don't have very many if any places that are car specialty store (yea I live in BFE)
Would I have to buy anything special like wires or anything for it? I never really tried this before so it's all really new to me. Thanks

Basically if you aren't running an amp to your speakers, there is no need to have a professional do it. One recommendation that not everyone realizes is that just because speakers are aftermarket, that does NOT mean they are better then stock. Your current speakers are worth about a dollar, but they are tuned by a professional engineer to get the best sound possible from poor equipement. Also, aftermarket speakers give a much clearer, louder sound but they are also made to not handle as much bass (will cause them to pop, damage the tinsel, etc) so make sure you don't have the bass up. Make sure you get a nice set of speakers, however there is no need to ever spend over 130$ or under 100$. I recommend Boston Accoustics, Image Dynamics, or Pioneer (ONLY the Rev series pioneers) wich can all be purchased at woofersetc.com .(not trying to advertise, just a satisfied customer)

Now to the installation, your car currently has a + and - wire (black is -, red(sometimeswhite)) wire is your +. The wire is already ran throughout your car to your stock cd player. With that wire harness, it allows that pre-done wiring to go right into your new CD Player! Your new speakers will have about 6' of wire with terminals that fit into your new speakers (so you don't have to worry about fitment.)All you do is simply cut the terminal off the old wiring (that's ran through your car) and use a butt connector to connect the new wiring (if you don't know what a butt connector is, google it and the second u see it you'll know why you need one). Now just put the new speakers in, screw em in and bam you're fine. Now, remember that some cars the WHOLE door panel has to come off to get to the 5.25's, so be very careful when taking them off/putting them on. Also, sometimes you need to bend the metal where the 6x9s are because the depth or magnet is to big. However, just bend it with a hammer, and it's pretty much impossible to not fit.

A car installation shop would probably want about 50$ per 2 speakers, and $50.00 for the CD player. I garuntee it won't even take them ONE hour to do it. Don't let them hustle you.

ps. don't even replace the dash speakers. Hopefully they're tweeters, wich means leave them alone. IF they are speakers, then leave them alone as they will just get drowned out by 5.25's anyways so don't even replace them.

2007-06-01 13:34:02 by that guy you never knew

i bot a set of 25 year old speakers last weak but i can't figure out how too Connect them too my mac mini. The connections on the speakers are one red and one black wire clips the connection on my mac is a stander headphone hack. is there a Type of adapter or sum trick that i can yous? the speakers have a 12 inch base speaker and a 4 inch and a 3 inch speaker above that.

You need an amplifier in betwin mac mini & speaker.

2009-02-02 14:55:57 by Roy R