8 inch speaker grill

I need someone with speaker AUTHORITY.
I have 4 1/2 inch speakers measured diagonally across the speaker grill hole to hole for screw mounting. The speakers are old but fairly decent still. Just some distortion when I pump up the volume a little to hear as I go down the road at 70 mph. Pioneer TS-1044k. 4 ohm. The power output on the speakers are 30w. Max music power 10 w nom. power.
The car stereo is a Sanyo with 25 watts rms at 8 ohms per channel. 4 channels.. It works just fine . I have front speakers I bought last year that are ok.
I really need to couple up the rear speakers for a real nice super sound. No distortion. I would spend a few bucks for the right kind, but not the moon. I am not a boom box blaster type but like Real quality sound. My ears are getting not as acute as when I was young. I do not want to be driven out of the VW Vanagon either. I like just about everything but rap, country, and Barbara Striesend. I like new age, Jazz, classical, old school rock. Neil Young. Now these I would like to hear the words. Blues, Blue grass. Get the sound and style I am into?
Please help me mate the exact right sounding speakers. Please no distortion. A clean clear full range with some bass, but thumping not needed.
Like I saw some speakers that went for $5.99 all the way up to $200. a speaker. I think that $200 might be a little too pricey. Just keep me in the ball park and hit a small home run. Thanks.

Ken

First of all, speakers don't have power output. Depending on their impedance and the amplifier you have, they'll receive a certain amount of power from the amplifier.

It is my professional option that rear speakers suck! I haven't used rear speakers in about 15 years. Also, $200 for speakers isn't too too bad. Check out Rainbows at $10k a set! lol.

Anyway, If it was my vehicle, I'd look into a better quality 4" for the front with an amplifier to push them. Make sure they're installed real well with quality baffling and a decent crossover. Nowhere will you find a "quality rear stage." In your top of the line home theater systems, all the main speakers are in front of you. At a concert, the speakers are in front of you. Etc. etc. etc. Why would your car be any different?

If you absolutely must have rear speakers for some reason, knock yourself out. Also, upgrading that horrible deck would be a step in the right direction. Sanyo has never made a quality unit and they never will. Sorry bro ... truth of the matter. Get a pioneer, alpine, eclipse, clarion, kenwood, jvc, panasonic, something other then Sanyo. That with some better speakers and you may be in business. If you're still not satisfied with your sound, I'd look to amplifying the fronts. If you're looking for more low end, look to a sub solution of some sort. Doesn't have to be 2 12" or anything like that. One 8" can often do the trick, or the right pair of 6".

I'm not sure if I answered any of your questions or not. Regardless, I hope some of the info is helpful to you. peace.

2008-08-04 15:47:38 by kensue356

- 99#39; V6 Black Solara - 8quot; JBL Sub - Sealed Box in Trunk - Hole in rear deck w/ speaker cover to allow more sound - 200w Clarion Amp ...

AUDIOVOX RAMPAGE

TRY-32

120 WATT 6x9" 3-WAY SPEAKERS

KEY FEATURES:
10 oz. Barium-ferrite magnets
Foam-roll air suspension edge
6 inch x 9 inch Woofer
Independent 2 1/2 in. mid-range driver with crossover
2 inch Piezo tweeter
Aluminum voice coil
Bridgeless post-mount construction
Metal mesh grilles
120 Watts peak power
70-18,000 Hz response
4-8 Ohm compatible

http://www.ubid.com/Audiovox_6%22x9%22_3 _WAY_SPEAKER_240_watt_Metal_grill_BRAND_ NEW/a602160768.html

ok, first to clear up wrong answers. a stock 00 grand am takes 4x6s in the front and 6x9s in the rear. so yes these speakers will fit fine.

however, these speakers are a waste of money. there going to sound bad, cause there cheap. if your going to replace your stock speakers, then do it right. get a good 6x9 from one of the following brands.

Boston Acoustics
Diamond Audio
Pioneer Premier
Kenwood Excelon
MB Quart

any 6x9 from any of these brands will sound much, much better then that POS you linked. why buy something that wont make your sound any better?

good luck

2008-01-10 20:38:49 by weeman

Price: $24.99

Includes Mounting Hardware
Compatible With Punch 2011 P1 Or P2 8 Inch Subwoofer
Inserts snugly into Gen-3 P1 trim rings
Stamped metal construction for plenty of strength
Easy Installation Using Existing Subwoofer Trim Ring

I have just purchased a NSM Galaxy jukebox and I took the grill off to check the speakers and basically they have all had it, literally

I have removed them and would like some kind soul to advise as to what I need .

In the lower cabinet there are two large woofer speakers, the hole in the cabinet measures 11 inches across

then there are two medium sized ones which say 8 ohms and the actual hole is 6 inches across

and then there is a smaller one at 8 ohms which is 4.5 inches across

The tweeters in the top of the cab are fine

Can anyone suggest speakers in the UK which would replace the ones taken out?

I would like to replace these asap but dont know what to go for, I dont want a subwoofer as the are for cars aint they
DO you measure the size of the woofer from side to side of the auctual woofer not the frame?
I have measured the space and its exactly 11 inches across ive looked on the auction site and aint seen any 11 inchers, guess theres no one bragging tonight

You have answered your question already,

You need 2 x 6" 8 ohm speakers (rated high enough in Watts as the AMP can supply)

and a 4.5" 8ohm speaker (again, with a similar or greater power rating in Watts)


The Sub, will also be marked for Impedance, measure the size of the steel frame diameter. - they are pretty much standard sizes.

Use the sub, they are NOT just for cars!


http://cpc.farnell.com

for speakers, try http://cpc.farnell.com ,search for speakers in the search box.

or

http://cpc.farnell.com/jsp/search/browse .jsp?N=411+1000525+500001

2008-12-13 13:57:35 by Wayne C

which one of these two nissans would you rather have. This is for a first car.

(FIRST CHOICE!)
2008 Nissan Altima 2.5 S
-Black Exterior
-Cloth interior (black)
-CD player With 6 speakers (Est. 200 watts)
-175 HP 4 cylinder engine.
-Tinted Windows.
-sunroof
-17 inch alloy wheels
-2 port exhaust

(2ND CHOICE)

2006 Nissan Maxima 3.5 SL

-Silver
-Black leather interior
-Heated seats and steering wheel
-Woodgrain interior trim.
-Bose 6 disc, 320 watt 8 speaker premium sound.
-sunroof
-spoiler
-tinted windows
-3.5 liter 265 horsepower V6
-XM radio.
-chrome/alloy 17 inch wheels.
-automatic climate control.
-dual power seats
-4 port exhaust
-chrome grill

Which one would you rather drive?

The Maxima obviously.

2009-02-09 18:24:50 by manryjustin

I want to know if this 12 inch sub Specs:

TS-W3002D4: Dual 4 ohm, 4 Layer, Long Coil (2 ohm x or 8 ohm)
Size 12"
Woofer Cone Material Interlaced Basalt/Carbon Fiber Reinforced IMPP Cone
Surround Wide-Roll, 3-Layer Fiber Woven Aramid Radial with Honeycomb Cloth
Voice Coil Dual 4-Layer, Long Voice Coil
Voice Coil Wire Copper
Voice Coil Bobbin Phenol Resin Coated Glass Cloth
Projected Pole Yoke with Vented Pole
Magnet Construction Double Stacked (114oz)
Basket Design Aluminum Die-Cast Rigid Chassis
Gasket 1-Piece ABS
Wire Terminals Integrated Single-Sided Silver Compression Terminals
Specifications
Watts MAX. Music Power 3500 Watts
Watts Nominal Power Handling 1000 Watts
Frequency Response 20 Hz to 150 Hz
Sensitivity 90 dB
Ohm Rating D2: (1 or 4 ohm) D4: (2 or 8 ohm)
Recommended Enclosure 0.50 ~ 1.0 Cubic Feet
Dimensions 329 mm x 214.2 mm
Mounting Depth 188.8 mm
Accessory Grill UD-G308

will work with this amp PRS-D1200SPL

Specifications:

Peak Music Power 2400 Watts
Number of Channels 1
Load Impedance Capability 1~8 Ohm
Continuous Power (4 ohm) 500W x 1
Continuous Power (2 ohm) 1000W x 1
Continuous Power (1 ohm) 1200W x 1
Frequency Response 40Hz ~ 240Hz
Signal-to-Noise Ratio 70dB
Dimensions 15" x 2-5/8" x 11-1/8"
Features
Channel # Capability 1
Class-D Design
PWM Regulated MOSFET Power Supply
MOSFET Output Section
MASS Compatible
Compression-Type Speaker Terminals
Balanced Isolator Input Circuit
RCA Inputs 2 Channel (Gold)
RCA Outputs (Pass Thru)
Input Level Control Hi-Volt (400mV ~ 6.5V)
Built-in Crossover LPF
Bass Level Control 0/6/9/12dB
Warranty 2 Year
CEA 2006 Specifications
Output Power (4 Ohm, <=1% THD) 500 Watts
Output Power (2 Ohm, <=1% THD) 1000 Watts
Signal to Noise (1 Watt into 4 Ohms) 54 dBA

i know that the speaker rms is 1000 watts, this amp if im not mistaken puts out 1000 watts at 2ohms, will the amp overheat? how should the speaker be wired? can this amp power this sub perfectly?

as long as you don't try to overdo it you should be ok, keep in mind companies will write 1000 on the box to get you to buy it, you shouldn't actually be trying to push that much all the time. and as far as wiring the speaker, if the amp is only one channel, i don't think you really have options

2009-02-14 23:59:10 by wcenteno