Precision Audio Speakers

micro precision series 5. 3 way, quot;squot; version car audio speakers.

can anyone help me to check on the price for monitor audio floorstanding and center speaker in singapore. i heard precision audio at Adelphi have a good deal. i am from malaysia. i am looking for BR2, BR5 and BRCLR

Go on eBay and I'll be you you'll find your best price that way.

Happy listening!

2009-01-20 00:28:15 by ctphua

Price: $24.95 $19.99

Allows enjoyment of movies with Dolby Digital® and DTS® surround sound.
Specially optimized low-loss optical fiber for higher fidelity.
Meets minimum THX® certification standards for proper system performance, reliability and ease of installation.
Meets minimum THX certification standards; measures 8 feet long
Precision-polished fiber optic connector for maximum signal transfer accuracy and lower internal reflection.

I have a dell precision t3500 desktop pc. i have 1 set of computer speakers that is connected to the audio input in the back of the tower, and another set of speakers that is connected in the front. whenever i turn on the speakers that are connected in the front, they override the ones connected in the back. How can I have them both working at the same time?

well bridgeware will do that but run both through same amp

but easy way is add a splitter to back to add speakers on back

2009-08-23 10:04:54 by anything doess

Price: $119.95

6.5-inch high-performance marine-certified coaxial speakers, perfect for boats of all types
Swivel-mount tweeter
180 Watts power handling with 4-ohm impedance
Swivel-mount tweeter allows precise aiming of sound
Polymer/Mica composite cone with butyl rubber surround

The sound quality on Yahho Musaic has recently been severly degraded. The sound quality os now overmodulated it seems. Distorted, overdone where once it was sweet and crisp and clear. I have not changed settings, hardware or seemingly anything. I am playing Yahoo music on a Dell Precision 490 with a Legacy audio card

Does other sites such as Pandora, LastFm, Imeem, etc still sound fine? if so just go smack Yahoo... If they sound the same as yahoo, then something else is wrong.

2007-10-01 08:50:43 by Steve T

okay so i am a DJ and i need speakers for 150+ people now i am deciding between the TAPCO TH-15A THUMP or the JBL EON15G2 here are the features and tech specs for each one please help.

oh yeah i want the better quality one of course and if you have any other suggestions for speakers please share but only powered has to be good with all frequencies and high volumes and good for 150+ people

TAPCO TH-15A:
2-way 15", bi-amplified, optimized active loudspeaker system
Ultra-lightweight - 36 lbs
400 watts system power
Precision digital electronics (crossover, time alignment, and phase correction)
Ported, bass reflex design for enhanced bass performance
Frequency response 40Hz-20kHz
15" high-precision low-frequency driver
1" compression driver
XLR mic/line input and pass-through
3-band EQ with sweepable mid for clarity (with bypass)
Ideal for pole mounting or stage monitor position
Tough, impact-resistant polypropylene enclosure
Convenient integrated handles in both sides and top
Designed by award-winning Mackie Active team

and the JBL EON15G2:
Frequency Range: (-10 dB): 39 Hz - 18 kHz
• Frequency Response: (±3 dB): 42 Hz - 17 kHz
• Horizontal Coverage: (-6 dB): 90° Nominal
• Vertical Coverage: (-6 dB): 60° Nominal
• Rated Maximum SPL: 129 dB, @ 1 m (3.3 ft)
• Dimensions (H x W x D) 686 mm x 430 mm x 444 mm (27 in x 17 in x 17.5 in.)
• Net Weight 21 kg (46 lbs.)
• LF Driver: Integral frame with one 15" (380 mm) driver, dual neodymium magnet, 2" differential drive voice-coil.
• HF Driver JBL 2418H-1 1" (throat diameter) compression driver with 1.75" diameter titanium diaphragm. Ferro-fluid cooled.
• Amplifier Power LF 300 watts @ low-frequency driver impedance.
• Amplifier Power HF 100 watts @ high-frequency driver impedance.
• Input 1 Sensitivity -44 dBu to -22 dBu for rated output (Mic/Line switch in MIC position). -12 dBu to +20 dBu for rated output (Mic/Line switch in LINE position).
• Input 2 & 3 Sensitivity -18 dBu to +20 dBu for rated output.
• Output Level +20 dBu (peak), Loop/Mix switch in MIX position.
• Audio Connectors
- Input 1 XLR/F, balanced
- Input 2 & 3 1/4" Phone, balanced (TRS)
• Crossover Frequency 1.5 kHz
• Limiting Low frequency amplifier controlled by dynamic filter.
• Loop/Mix Out XLR/M, balanced
• EQ High Frequency Shelving, ±15 dB @ 5 kHz Low Frequency Shelving, ±15 dB @ 120 Hz.
• AC Input 110 - 230 VAC, 50 - 60 Hz., 175 watts rating per UL, detachable IEC power cable.
o btw im on a 1000 dollar budget

If that's all we get to choose from, flip a coin... If it was MY money, I'd get a pair of Mackie SA1521Z.

2009-01-12 14:13:12 by DJ Lavy